#[non_exhaustive]pub struct ParseResult {
pub value: Value,
pub errors: Vec<Error>,
pub is_complete: bool,
}Expand description
Result of an error-recovering parse pass.
value is the best-effort tree the recoverer was able to
salvage from the input. errors lists every error the
recoverer encountered, in the order it found them.
is_complete is true when no errors were collected — the
input parsed cleanly on the first attempt.
Fields (Non-exhaustive)§
This struct is marked as non-exhaustive
Struct { .. } syntax; cannot be matched against without a wildcard ..; and struct update syntax will not work.value: ValueBest-effort recovered value. For multi-document input
this is a Value::Sequence of per-document values
(recovered or Value::Null); for single-document input
it is the recovered document directly.
errors: Vec<Error>Every error the recoverer encountered, in source order.
is_complete: booltrue when no errors were collected.
Trait Implementations§
Auto Trait Implementations§
impl !RefUnwindSafe for ParseResult
impl !UnwindSafe for ParseResult
impl Freeze for ParseResult
impl Send for ParseResult
impl Sync for ParseResult
impl Unpin for ParseResult
impl UnsafeUnpin for ParseResult
Blanket Implementations§
Source§impl<T> BorrowMut<T> for Twhere
T: ?Sized,
impl<T> BorrowMut<T> for Twhere
T: ?Sized,
Source§fn borrow_mut(&mut self) -> &mut T
fn borrow_mut(&mut self) -> &mut T
impl<T> ErasedDestructor for Twhere
T: 'static,
Source§impl<T> IntoEither for T
impl<T> IntoEither for T
Source§fn into_either(self, into_left: bool) -> Either<Self, Self> ⓘ
fn into_either(self, into_left: bool) -> Either<Self, Self> ⓘ
self into a Left variant of Either<Self, Self>
if into_left is true.
Converts self into a Right variant of Either<Self, Self>
otherwise. Read moreSource§fn into_either_with<F>(self, into_left: F) -> Either<Self, Self> ⓘ
fn into_either_with<F>(self, into_left: F) -> Either<Self, Self> ⓘ
self into a Left variant of Either<Self, Self>
if into_left(&self) returns true.
Converts self into a Right variant of Either<Self, Self>
otherwise. Read moreimpl<T> MaybeSendSync for T
§impl<D> OwoColorize for D
impl<D> OwoColorize for D
§fn fg<C>(&self) -> FgColorDisplay<'_, C, Self>where
C: Color,
fn fg<C>(&self) -> FgColorDisplay<'_, C, Self>where
C: Color,
§fn bg<C>(&self) -> BgColorDisplay<'_, C, Self>where
C: Color,
fn bg<C>(&self) -> BgColorDisplay<'_, C, Self>where
C: Color,
§fn on_magenta(&self) -> BgColorDisplay<'_, Magenta, Self>
fn on_magenta(&self) -> BgColorDisplay<'_, Magenta, Self>
§fn default_color(&self) -> FgColorDisplay<'_, Default, Self>
fn default_color(&self) -> FgColorDisplay<'_, Default, Self>
§fn on_default_color(&self) -> BgColorDisplay<'_, Default, Self>
fn on_default_color(&self) -> BgColorDisplay<'_, Default, Self>
§fn bright_black(&self) -> FgColorDisplay<'_, BrightBlack, Self>
fn bright_black(&self) -> FgColorDisplay<'_, BrightBlack, Self>
§fn on_bright_black(&self) -> BgColorDisplay<'_, BrightBlack, Self>
fn on_bright_black(&self) -> BgColorDisplay<'_, BrightBlack, Self>
§fn bright_red(&self) -> FgColorDisplay<'_, BrightRed, Self>
fn bright_red(&self) -> FgColorDisplay<'_, BrightRed, Self>
§fn on_bright_red(&self) -> BgColorDisplay<'_, BrightRed, Self>
fn on_bright_red(&self) -> BgColorDisplay<'_, BrightRed, Self>
§fn bright_green(&self) -> FgColorDisplay<'_, BrightGreen, Self>
fn bright_green(&self) -> FgColorDisplay<'_, BrightGreen, Self>
§fn on_bright_green(&self) -> BgColorDisplay<'_, BrightGreen, Self>
fn on_bright_green(&self) -> BgColorDisplay<'_, BrightGreen, Self>
§fn bright_yellow(&self) -> FgColorDisplay<'_, BrightYellow, Self>
fn bright_yellow(&self) -> FgColorDisplay<'_, BrightYellow, Self>
§fn on_bright_yellow(&self) -> BgColorDisplay<'_, BrightYellow, Self>
fn on_bright_yellow(&self) -> BgColorDisplay<'_, BrightYellow, Self>
§fn bright_blue(&self) -> FgColorDisplay<'_, BrightBlue, Self>
fn bright_blue(&self) -> FgColorDisplay<'_, BrightBlue, Self>
§fn on_bright_blue(&self) -> BgColorDisplay<'_, BrightBlue, Self>
fn on_bright_blue(&self) -> BgColorDisplay<'_, BrightBlue, Self>
§fn bright_magenta(&self) -> FgColorDisplay<'_, BrightMagenta, Self>
fn bright_magenta(&self) -> FgColorDisplay<'_, BrightMagenta, Self>
§fn on_bright_magenta(&self) -> BgColorDisplay<'_, BrightMagenta, Self>
fn on_bright_magenta(&self) -> BgColorDisplay<'_, BrightMagenta, Self>
§fn bright_purple(&self) -> FgColorDisplay<'_, BrightMagenta, Self>
fn bright_purple(&self) -> FgColorDisplay<'_, BrightMagenta, Self>
§fn on_bright_purple(&self) -> BgColorDisplay<'_, BrightMagenta, Self>
fn on_bright_purple(&self) -> BgColorDisplay<'_, BrightMagenta, Self>
§fn bright_cyan(&self) -> FgColorDisplay<'_, BrightCyan, Self>
fn bright_cyan(&self) -> FgColorDisplay<'_, BrightCyan, Self>
§fn on_bright_cyan(&self) -> BgColorDisplay<'_, BrightCyan, Self>
fn on_bright_cyan(&self) -> BgColorDisplay<'_, BrightCyan, Self>
§fn bright_white(&self) -> FgColorDisplay<'_, BrightWhite, Self>
fn bright_white(&self) -> FgColorDisplay<'_, BrightWhite, Self>
§fn on_bright_white(&self) -> BgColorDisplay<'_, BrightWhite, Self>
fn on_bright_white(&self) -> BgColorDisplay<'_, BrightWhite, Self>
§fn blink_fast(&self) -> BlinkFastDisplay<'_, Self>
fn blink_fast(&self) -> BlinkFastDisplay<'_, Self>
§fn strikethrough(&self) -> StrikeThroughDisplay<'_, Self>
fn strikethrough(&self) -> StrikeThroughDisplay<'_, Self>
§fn color<Color>(&self, color: Color) -> FgDynColorDisplay<'_, Color, Self>where
Color: DynColor,
fn color<Color>(&self, color: Color) -> FgDynColorDisplay<'_, Color, Self>where
Color: DynColor,
OwoColorize::fg] or
a color-specific method, such as [OwoColorize::green], Read more§fn on_color<Color>(&self, color: Color) -> BgDynColorDisplay<'_, Color, Self>where
Color: DynColor,
fn on_color<Color>(&self, color: Color) -> BgDynColorDisplay<'_, Color, Self>where
Color: DynColor,
OwoColorize::bg] or
a color-specific method, such as [OwoColorize::on_yellow], Read more§fn fg_rgb<const R: u8, const G: u8, const B: u8>(
&self,
) -> FgColorDisplay<'_, CustomColor<R, G, B>, Self>
fn fg_rgb<const R: u8, const G: u8, const B: u8>( &self, ) -> FgColorDisplay<'_, CustomColor<R, G, B>, Self>
§fn bg_rgb<const R: u8, const G: u8, const B: u8>(
&self,
) -> BgColorDisplay<'_, CustomColor<R, G, B>, Self>
fn bg_rgb<const R: u8, const G: u8, const B: u8>( &self, ) -> BgColorDisplay<'_, CustomColor<R, G, B>, Self>
§fn truecolor(&self, r: u8, g: u8, b: u8) -> FgDynColorDisplay<'_, Rgb, Self>
fn truecolor(&self, r: u8, g: u8, b: u8) -> FgDynColorDisplay<'_, Rgb, Self>
§fn on_truecolor(&self, r: u8, g: u8, b: u8) -> BgDynColorDisplay<'_, Rgb, Self>
fn on_truecolor(&self, r: u8, g: u8, b: u8) -> BgDynColorDisplay<'_, Rgb, Self>
§impl<T> Paint for Twhere
T: ?Sized,
impl<T> Paint for Twhere
T: ?Sized,
§fn fg(&self, value: Color) -> Painted<&T>
fn fg(&self, value: Color) -> Painted<&T>
Returns a styled value derived from self with the foreground set to
value.
This method should be used rarely. Instead, prefer to use color-specific
builder methods like red() and
green(), which have the same functionality but are
pithier.
§Example
Set foreground color to white using fg():
use yansi::{Paint, Color};
painted.fg(Color::White);Set foreground color to white using white().
use yansi::Paint;
painted.white();§fn bright_black(&self) -> Painted<&T>
fn bright_black(&self) -> Painted<&T>
§fn bright_red(&self) -> Painted<&T>
fn bright_red(&self) -> Painted<&T>
§fn bright_green(&self) -> Painted<&T>
fn bright_green(&self) -> Painted<&T>
§fn bright_yellow(&self) -> Painted<&T>
fn bright_yellow(&self) -> Painted<&T>
§fn bright_blue(&self) -> Painted<&T>
fn bright_blue(&self) -> Painted<&T>
§fn bright_magenta(&self) -> Painted<&T>
fn bright_magenta(&self) -> Painted<&T>
§fn bright_cyan(&self) -> Painted<&T>
fn bright_cyan(&self) -> Painted<&T>
§fn bright_white(&self) -> Painted<&T>
fn bright_white(&self) -> Painted<&T>
§fn bg(&self, value: Color) -> Painted<&T>
fn bg(&self, value: Color) -> Painted<&T>
Returns a styled value derived from self with the background set to
value.
This method should be used rarely. Instead, prefer to use color-specific
builder methods like on_red() and
on_green(), which have the same functionality but
are pithier.
§Example
Set background color to red using fg():
use yansi::{Paint, Color};
painted.bg(Color::Red);Set background color to red using on_red().
use yansi::Paint;
painted.on_red();§fn on_primary(&self) -> Painted<&T>
fn on_primary(&self) -> Painted<&T>
§fn on_magenta(&self) -> Painted<&T>
fn on_magenta(&self) -> Painted<&T>
§fn on_bright_black(&self) -> Painted<&T>
fn on_bright_black(&self) -> Painted<&T>
§fn on_bright_red(&self) -> Painted<&T>
fn on_bright_red(&self) -> Painted<&T>
§fn on_bright_green(&self) -> Painted<&T>
fn on_bright_green(&self) -> Painted<&T>
§fn on_bright_yellow(&self) -> Painted<&T>
fn on_bright_yellow(&self) -> Painted<&T>
§fn on_bright_blue(&self) -> Painted<&T>
fn on_bright_blue(&self) -> Painted<&T>
§fn on_bright_magenta(&self) -> Painted<&T>
fn on_bright_magenta(&self) -> Painted<&T>
§fn on_bright_cyan(&self) -> Painted<&T>
fn on_bright_cyan(&self) -> Painted<&T>
§fn on_bright_white(&self) -> Painted<&T>
fn on_bright_white(&self) -> Painted<&T>
§fn attr(&self, value: Attribute) -> Painted<&T>
fn attr(&self, value: Attribute) -> Painted<&T>
Enables the styling [Attribute] value.
This method should be used rarely. Instead, prefer to use
attribute-specific builder methods like bold() and
underline(), which have the same functionality
but are pithier.
§Example
Make text bold using attr():
use yansi::{Paint, Attribute};
painted.attr(Attribute::Bold);Make text bold using using bold().
use yansi::Paint;
painted.bold();§fn rapid_blink(&self) -> Painted<&T>
fn rapid_blink(&self) -> Painted<&T>
§fn quirk(&self, value: Quirk) -> Painted<&T>
fn quirk(&self, value: Quirk) -> Painted<&T>
Enables the yansi [Quirk] value.
This method should be used rarely. Instead, prefer to use quirk-specific
builder methods like mask() and
wrap(), which have the same functionality but are
pithier.
§Example
Enable wrapping using .quirk():
use yansi::{Paint, Quirk};
painted.quirk(Quirk::Wrap);Enable wrapping using wrap().
use yansi::Paint;
painted.wrap();§fn clear(&self) -> Painted<&T>
👎Deprecated since 1.0.1: renamed to resetting() due to conflicts with Vec::clear().
The clear() method will be removed in a future release.
fn clear(&self) -> Painted<&T>
renamed to resetting() due to conflicts with Vec::clear().
The clear() method will be removed in a future release.
§fn whenever(&self, value: Condition) -> Painted<&T>
fn whenever(&self, value: Condition) -> Painted<&T>
Conditionally enable styling based on whether the [Condition] value
applies. Replaces any previous condition.
See the crate level docs for more details.
§Example
Enable styling painted only when both stdout and stderr are TTYs:
use yansi::{Paint, Condition};
painted.red().on_yellow().whenever(Condition::STDOUTERR_ARE_TTY);