pub struct SafeFileResolver { /* private fields */ }Expand description
Filesystem-backed IncludeResolver with root-dir
sandboxing.
Behind the include_fs Cargo feature (which implies
include + std).
§Sandboxing
On Unix, the root is opened once as a directory capability. Every
subsequent file open is relative to that handle, so renaming or
replacing the path used to construct the resolver cannot redirect
later reads. Targets canonicalise to a root-relative path and then
open every component without following symlinks. Windows retains
canonical root checks. Path-traversal attempts (../../etc/passwd)
and symlink targets outside the root are rejected before content is
read.
§What is read
Only regular files are read. A directory, FIFO, socket or device is
refused, and on Unix the file is opened non-blocking so that a FIFO
planted under the root cannot stall the parse before it is refused.
At most IncludeRequest::max_bytes plus one bytes are read, so an
oversized file costs no more memory than the budget it exceeds.
Paths in error messages and InputSource::name are relative to
the root and use / separators on every platform: a document author
learns nothing about where the root sits on the host, and a source
has the same name on Windows as elsewhere.
§Symlinks
Controlled by SymlinkPolicy. On Unix, the default
SymlinkPolicy::FollowWithinRoot resolves symlinks through
the directory capability. SymlinkPolicy::Reject opens each
directory component and the final file without following
symlinks, avoiding a metadata-then-open race. Windows enforces
the same policies through canonical path and metadata checks; there
the path is canonicalised and then opened by name, so a link swapped
in between those two steps is not detected. The regular-file check
runs on the opened handle on every platform, which also refuses
Windows device names such as CON or NUL. Hard links are not
symlinks and are followed on every platform: a hard link inside the
root to a file outside it is read.
§Examples
use noyalib::include::{SafeFileResolver, SymlinkPolicy};
let resolver = SafeFileResolver::new("/srv/configs")
.symlink_policy(SymlinkPolicy::Reject)
.into_resolver();
let cfg = noyalib::ParserConfig::new().include_resolver(resolver);Implementations§
Source§impl SafeFileResolver
impl SafeFileResolver
Sourcepub fn new(root: impl Into<PathBuf>) -> Self
pub fn new(root: impl Into<PathBuf>) -> Self
Construct a resolver rooted at root. All resolved paths
must canonicalise to a descendant of root.
§Examples
use noyalib::include::SafeFileResolver;
let r = SafeFileResolver::new("/srv/configs");
let _ = r;The root is opened during construction. Because this constructor retains its historical infallible signature, an open failure is stored and returned when the resolver is first invoked.
Sourcepub fn symlink_policy(self, policy: SymlinkPolicy) -> Self
pub fn symlink_policy(self, policy: SymlinkPolicy) -> Self
Set the SymlinkPolicy.
Sourcepub fn into_resolver(self) -> IncludeResolver
pub fn into_resolver(self) -> IncludeResolver
Convert this configuration into a boxed IncludeResolver
suitable for crate::ParserConfig::include_resolver.
Trait Implementations§
Source§impl Clone for SafeFileResolver
impl Clone for SafeFileResolver
Source§fn clone(&self) -> SafeFileResolver
fn clone(&self) -> SafeFileResolver
1.0.0 (const: unstable) · Source§fn clone_from(&mut self, source: &Self)
fn clone_from(&mut self, source: &Self)
source. Read moreAuto Trait Implementations§
impl Freeze for SafeFileResolver
impl RefUnwindSafe for SafeFileResolver
impl Send for SafeFileResolver
impl Sync for SafeFileResolver
impl Unpin for SafeFileResolver
impl UnsafeUnpin for SafeFileResolver
impl UnwindSafe for SafeFileResolver
Blanket Implementations§
Source§impl<T> BorrowMut<T> for Twhere
T: ?Sized,
impl<T> BorrowMut<T> for Twhere
T: ?Sized,
Source§fn borrow_mut(&mut self) -> &mut T
fn borrow_mut(&mut self) -> &mut T
Source§impl<T> CloneToUninit for Twhere
T: Clone,
impl<T> CloneToUninit for Twhere
T: Clone,
impl<T> ErasedDestructor for Twhere
T: 'static,
Source§impl<T> IntoEither for T
impl<T> IntoEither for T
Source§fn into_either(self, into_left: bool) -> Either<Self, Self> ⓘ
fn into_either(self, into_left: bool) -> Either<Self, Self> ⓘ
self into a Left variant of Either<Self, Self>
if into_left is true.
Converts self into a Right variant of Either<Self, Self>
otherwise. Read moreSource§fn into_either_with<F>(self, into_left: F) -> Either<Self, Self> ⓘ
fn into_either_with<F>(self, into_left: F) -> Either<Self, Self> ⓘ
self into a Left variant of Either<Self, Self>
if into_left(&self) returns true.
Converts self into a Right variant of Either<Self, Self>
otherwise. Read moreimpl<T> MaybeSendSync for T
§impl<D> OwoColorize for D
impl<D> OwoColorize for D
§fn fg<C>(&self) -> FgColorDisplay<'_, C, Self>where
C: Color,
fn fg<C>(&self) -> FgColorDisplay<'_, C, Self>where
C: Color,
§fn bg<C>(&self) -> BgColorDisplay<'_, C, Self>where
C: Color,
fn bg<C>(&self) -> BgColorDisplay<'_, C, Self>where
C: Color,
§fn on_magenta(&self) -> BgColorDisplay<'_, Magenta, Self>
fn on_magenta(&self) -> BgColorDisplay<'_, Magenta, Self>
§fn default_color(&self) -> FgColorDisplay<'_, Default, Self>
fn default_color(&self) -> FgColorDisplay<'_, Default, Self>
§fn on_default_color(&self) -> BgColorDisplay<'_, Default, Self>
fn on_default_color(&self) -> BgColorDisplay<'_, Default, Self>
§fn bright_black(&self) -> FgColorDisplay<'_, BrightBlack, Self>
fn bright_black(&self) -> FgColorDisplay<'_, BrightBlack, Self>
§fn on_bright_black(&self) -> BgColorDisplay<'_, BrightBlack, Self>
fn on_bright_black(&self) -> BgColorDisplay<'_, BrightBlack, Self>
§fn bright_red(&self) -> FgColorDisplay<'_, BrightRed, Self>
fn bright_red(&self) -> FgColorDisplay<'_, BrightRed, Self>
§fn on_bright_red(&self) -> BgColorDisplay<'_, BrightRed, Self>
fn on_bright_red(&self) -> BgColorDisplay<'_, BrightRed, Self>
§fn bright_green(&self) -> FgColorDisplay<'_, BrightGreen, Self>
fn bright_green(&self) -> FgColorDisplay<'_, BrightGreen, Self>
§fn on_bright_green(&self) -> BgColorDisplay<'_, BrightGreen, Self>
fn on_bright_green(&self) -> BgColorDisplay<'_, BrightGreen, Self>
§fn bright_yellow(&self) -> FgColorDisplay<'_, BrightYellow, Self>
fn bright_yellow(&self) -> FgColorDisplay<'_, BrightYellow, Self>
§fn on_bright_yellow(&self) -> BgColorDisplay<'_, BrightYellow, Self>
fn on_bright_yellow(&self) -> BgColorDisplay<'_, BrightYellow, Self>
§fn bright_blue(&self) -> FgColorDisplay<'_, BrightBlue, Self>
fn bright_blue(&self) -> FgColorDisplay<'_, BrightBlue, Self>
§fn on_bright_blue(&self) -> BgColorDisplay<'_, BrightBlue, Self>
fn on_bright_blue(&self) -> BgColorDisplay<'_, BrightBlue, Self>
§fn bright_magenta(&self) -> FgColorDisplay<'_, BrightMagenta, Self>
fn bright_magenta(&self) -> FgColorDisplay<'_, BrightMagenta, Self>
§fn on_bright_magenta(&self) -> BgColorDisplay<'_, BrightMagenta, Self>
fn on_bright_magenta(&self) -> BgColorDisplay<'_, BrightMagenta, Self>
§fn bright_purple(&self) -> FgColorDisplay<'_, BrightMagenta, Self>
fn bright_purple(&self) -> FgColorDisplay<'_, BrightMagenta, Self>
§fn on_bright_purple(&self) -> BgColorDisplay<'_, BrightMagenta, Self>
fn on_bright_purple(&self) -> BgColorDisplay<'_, BrightMagenta, Self>
§fn bright_cyan(&self) -> FgColorDisplay<'_, BrightCyan, Self>
fn bright_cyan(&self) -> FgColorDisplay<'_, BrightCyan, Self>
§fn on_bright_cyan(&self) -> BgColorDisplay<'_, BrightCyan, Self>
fn on_bright_cyan(&self) -> BgColorDisplay<'_, BrightCyan, Self>
§fn bright_white(&self) -> FgColorDisplay<'_, BrightWhite, Self>
fn bright_white(&self) -> FgColorDisplay<'_, BrightWhite, Self>
§fn on_bright_white(&self) -> BgColorDisplay<'_, BrightWhite, Self>
fn on_bright_white(&self) -> BgColorDisplay<'_, BrightWhite, Self>
§fn blink_fast(&self) -> BlinkFastDisplay<'_, Self>
fn blink_fast(&self) -> BlinkFastDisplay<'_, Self>
§fn strikethrough(&self) -> StrikeThroughDisplay<'_, Self>
fn strikethrough(&self) -> StrikeThroughDisplay<'_, Self>
§fn color<Color>(&self, color: Color) -> FgDynColorDisplay<'_, Color, Self>where
Color: DynColor,
fn color<Color>(&self, color: Color) -> FgDynColorDisplay<'_, Color, Self>where
Color: DynColor,
OwoColorize::fg] or
a color-specific method, such as [OwoColorize::green], Read more§fn on_color<Color>(&self, color: Color) -> BgDynColorDisplay<'_, Color, Self>where
Color: DynColor,
fn on_color<Color>(&self, color: Color) -> BgDynColorDisplay<'_, Color, Self>where
Color: DynColor,
OwoColorize::bg] or
a color-specific method, such as [OwoColorize::on_yellow], Read more§fn fg_rgb<const R: u8, const G: u8, const B: u8>(
&self,
) -> FgColorDisplay<'_, CustomColor<R, G, B>, Self>
fn fg_rgb<const R: u8, const G: u8, const B: u8>( &self, ) -> FgColorDisplay<'_, CustomColor<R, G, B>, Self>
§fn bg_rgb<const R: u8, const G: u8, const B: u8>(
&self,
) -> BgColorDisplay<'_, CustomColor<R, G, B>, Self>
fn bg_rgb<const R: u8, const G: u8, const B: u8>( &self, ) -> BgColorDisplay<'_, CustomColor<R, G, B>, Self>
§fn truecolor(&self, r: u8, g: u8, b: u8) -> FgDynColorDisplay<'_, Rgb, Self>
fn truecolor(&self, r: u8, g: u8, b: u8) -> FgDynColorDisplay<'_, Rgb, Self>
§fn on_truecolor(&self, r: u8, g: u8, b: u8) -> BgDynColorDisplay<'_, Rgb, Self>
fn on_truecolor(&self, r: u8, g: u8, b: u8) -> BgDynColorDisplay<'_, Rgb, Self>
§impl<T> Paint for Twhere
T: ?Sized,
impl<T> Paint for Twhere
T: ?Sized,
§fn fg(&self, value: Color) -> Painted<&T>
fn fg(&self, value: Color) -> Painted<&T>
Returns a styled value derived from self with the foreground set to
value.
This method should be used rarely. Instead, prefer to use color-specific
builder methods like red() and
green(), which have the same functionality but are
pithier.
§Example
Set foreground color to white using fg():
use yansi::{Paint, Color};
painted.fg(Color::White);Set foreground color to white using white().
use yansi::Paint;
painted.white();§fn bright_black(&self) -> Painted<&T>
fn bright_black(&self) -> Painted<&T>
§fn bright_red(&self) -> Painted<&T>
fn bright_red(&self) -> Painted<&T>
§fn bright_green(&self) -> Painted<&T>
fn bright_green(&self) -> Painted<&T>
§fn bright_yellow(&self) -> Painted<&T>
fn bright_yellow(&self) -> Painted<&T>
§fn bright_blue(&self) -> Painted<&T>
fn bright_blue(&self) -> Painted<&T>
§fn bright_magenta(&self) -> Painted<&T>
fn bright_magenta(&self) -> Painted<&T>
§fn bright_cyan(&self) -> Painted<&T>
fn bright_cyan(&self) -> Painted<&T>
§fn bright_white(&self) -> Painted<&T>
fn bright_white(&self) -> Painted<&T>
§fn bg(&self, value: Color) -> Painted<&T>
fn bg(&self, value: Color) -> Painted<&T>
Returns a styled value derived from self with the background set to
value.
This method should be used rarely. Instead, prefer to use color-specific
builder methods like on_red() and
on_green(), which have the same functionality but
are pithier.
§Example
Set background color to red using fg():
use yansi::{Paint, Color};
painted.bg(Color::Red);Set background color to red using on_red().
use yansi::Paint;
painted.on_red();§fn on_primary(&self) -> Painted<&T>
fn on_primary(&self) -> Painted<&T>
§fn on_magenta(&self) -> Painted<&T>
fn on_magenta(&self) -> Painted<&T>
§fn on_bright_black(&self) -> Painted<&T>
fn on_bright_black(&self) -> Painted<&T>
§fn on_bright_red(&self) -> Painted<&T>
fn on_bright_red(&self) -> Painted<&T>
§fn on_bright_green(&self) -> Painted<&T>
fn on_bright_green(&self) -> Painted<&T>
§fn on_bright_yellow(&self) -> Painted<&T>
fn on_bright_yellow(&self) -> Painted<&T>
§fn on_bright_blue(&self) -> Painted<&T>
fn on_bright_blue(&self) -> Painted<&T>
§fn on_bright_magenta(&self) -> Painted<&T>
fn on_bright_magenta(&self) -> Painted<&T>
§fn on_bright_cyan(&self) -> Painted<&T>
fn on_bright_cyan(&self) -> Painted<&T>
§fn on_bright_white(&self) -> Painted<&T>
fn on_bright_white(&self) -> Painted<&T>
§fn attr(&self, value: Attribute) -> Painted<&T>
fn attr(&self, value: Attribute) -> Painted<&T>
Enables the styling [Attribute] value.
This method should be used rarely. Instead, prefer to use
attribute-specific builder methods like bold() and
underline(), which have the same functionality
but are pithier.
§Example
Make text bold using attr():
use yansi::{Paint, Attribute};
painted.attr(Attribute::Bold);Make text bold using using bold().
use yansi::Paint;
painted.bold();§fn rapid_blink(&self) -> Painted<&T>
fn rapid_blink(&self) -> Painted<&T>
§fn quirk(&self, value: Quirk) -> Painted<&T>
fn quirk(&self, value: Quirk) -> Painted<&T>
Enables the yansi [Quirk] value.
This method should be used rarely. Instead, prefer to use quirk-specific
builder methods like mask() and
wrap(), which have the same functionality but are
pithier.
§Example
Enable wrapping using .quirk():
use yansi::{Paint, Quirk};
painted.quirk(Quirk::Wrap);Enable wrapping using wrap().
use yansi::Paint;
painted.wrap();§fn clear(&self) -> Painted<&T>
👎Deprecated since 1.0.1: renamed to resetting() due to conflicts with Vec::clear().
The clear() method will be removed in a future release.
fn clear(&self) -> Painted<&T>
renamed to resetting() due to conflicts with Vec::clear().
The clear() method will be removed in a future release.
§fn whenever(&self, value: Condition) -> Painted<&T>
fn whenever(&self, value: Condition) -> Painted<&T>
Conditionally enable styling based on whether the [Condition] value
applies. Replaces any previous condition.
See the crate level docs for more details.
§Example
Enable styling painted only when both stdout and stderr are TTYs:
use yansi::{Paint, Condition};
painted.red().on_yellow().whenever(Condition::STDOUTERR_ARE_TTY);